Make your violin

Check out out tools to build violins, violas, cellos and more!

Make your masterpiece

Woodworking is an art.That's why Cremona Tools has the best assortment of products for lutherie and woodworking


The best tools and materials for violin making, bow making and restoration

Best sellers

Veritas - Block planes

These block planes stand apart from the rest. The tall side wings are ideal for shooting, and finger grips in the sides improve control. The combined blade advance and lateral adjust is the most sensitive, accurate adjustment mechanism available. Two guide screws prevent blade shifting. The ductile cast iron body can take hard knocks, and the adjustable nosepiece does not extend past the body, so it cannot be driven into the blade if you drop the plane. Both planes are machined to exacting standards, with milled sides and soles that are surface ground to a fine finish.

Compact all-round planes for fine shavings. The mouth opening can be adjusted according to the application, using the configurable shoe (for removing thick or thin shavings). The indentations in the sides make it easier to guide this handy plane accurately. Central setscrew for iron depth and lateral adjustment.

For general-purpose work, the standard model is 1/8" taller than its low-angle sibling and has a 20° bed angle and a low-profile lever cap that fits the hand well. The low-angle plane is a delight to use. With its 12° bed angle, it excels at end-grain work. Each includes a chatterfree 25° blade in A2, O1 or PM-V11® tool steel.

Blades – Choice of A2, O1 or PM-V11® Tool Steel


Starting at: €29.90 Incl. Tax

ALEX Planes® Low Angle Rebating Block Plane


  • Material of body: iron
  • Material of blade: T10
  • Hardness of blade: 60-63
  • Blade thickness and width: 3 x 44.5mm
  • Bronze cap and brass fittings
  • Degree of blade cutting edge: 25 degree
  • Degree of blade with sole: 12 degree
  • Weight: 750g
  • Size: 165 x 44.5mm
€59.90 Incl. Tax

ALEX Low Angle Jack Plane

Low Angle Jack Plane supplying with the 25 degree iron and including the 38 degree and the 50 degree iron free of charge!

Our Low Angle Jack Plane is based on the Stanley 62. It is a 14" (35.56cm) plane with a 2" (5.08cm) blade bedded at 12°. An adjustable shoe allows easy, precise adjustment of the mouth opening. Norton lateral blade adjustment system.


  • Material of blade: T10   
  • Hardness of blade: RC60-63
  • Material of lever cap: stainless steel
  • Material of handle: red rose wood
€149.00 Incl. Tax

Hock Tools 2 3/8" (fits #4½, #5½, #6, #7)

These 3/32" thick blades offer a substantial improvement over the inferior chrome-vanadium junk that comes with most new tools. Our high carbon steel blades can be honed easier and sharper.

The 2 3/8"  fits  #4-1/2, #5-1/2, #6, #7

€41.10 Incl. Tax

Best offers