This website uses technical and third-parties cookies to provide a vary range of services. If you want more informations, or you want to specify which cookies to accept or not, click on More information. By using this website, you accept the usage of the cookies. More information about cookies
Assembly Time After Glue Application 25-30 minutes (70°F./50%RH)
Minimum required spread Approximately 6 mils or 250 square feet per gallon
Required clamping pressure Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).
Method of Application Easily spread with a roller, spreader or brush. *NOTE: This product cures by reaction with moisture. Changes in humidity, temperature and moisture content of the glued surfaces will affect open time and minimum clamp time. Maximum open time can be determined by excessive foam development in the adhesive. Minimum clamp time can be determined when squeeze out of adhesive becomes firm.
Cleanup Mineral spirits while glue is wet. Scrape or sand off dried excess.
Limitations Titebond Polyurethane Glue is not for structural applications or for use below the waterline. For ease of application, the glue, temperature and materials to be bonded should be above 50°F. Lower temperatures will cause the glue to thicken.
WARNING: EYE AND SKIN IRRITANT. POTENTIAL SKIN AND RESPIRATORY SENSITIZER. Contains isocyanate containing polymers. Contact causes eye irritation. Prolonged or repeated skin exposure may cause irritation and sensitization or allergic reaction. Contact may stain skin. Do not allow eye contact. Avoid prolonged or repeated contact with skin. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and seek medical attention. For skin, wash thoroughly with soap and water. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
Cremona Tools SAS di Tossani Alessandro & C - Corso XX Settembre 39 - 26100 Cremona - Italy - Tel.: +39 0372 801808 - Fax: +39 0372 801809
VAT IT01601990193 |
Codice Fiscale: 01601990193 |
Numero REA: CR-186336 |
Reg. Imprese Camera di Commercio di Cremona n.: 01601990193