Violin and viola. Procedure for the costruction. Following the classical cremonese method - Chinese text

In stock
Show more product details
The violin and the viola. Procedures for construction. According to the classic Cremonese method of the internal form.

Amelio Cicuttini, an engineer originally from Friuli, approaches the Cremonese violin making for passion and elaborates, thanks to the teachings of the great master violin maker Francesco Bissolotti and the studies on classical violin making, this construction method and working procedures for the four instruments: violin, viola, cello and double bass.

Technical tables with measurements
1 Preparation of the mould and blocks
2 Ribs
3 Linings
4 Back
5 Belly
6 Cutting of the F-holes
7 Bassbar
8 Application of the ground
9 Extraction of the mould
10 Applying the top
11 Edge and corners
12 Purfling
13 Flute
14 Lower saddle
15 Neck
16 Fingerboard, nut and neck (shaping and gluing)
17 Endpin
18 Set the neck
19 Heel and button
20 Preparing for varnishing
21 Varnish
22 Pegs
23 Finish of the neck
24 Finishing the lower saddle
25 Bridge
26 Sound-post
27 Painting of the edge of the f-holes and of the peg box
28 Instrument setup with tailpiece and strings

81 pages 19 x 24.5cm