Spray activator for cyanolitic glues
Sku:
504000
In stock
€6.72
Request a quote
We will reply within 24 hours
Product:
With this activator spray, all cyanolitic glues will dry within seconds.
This is a particularly interesting method of filling gaps. The correct procedure is to apply first the provided spray to the surface, let it dry and then apply the glue. If you apply the glue first and then then use the spray, the resulting reaction can cause the glue to turn white. For example, it is often used in bowmaking to fill in worn areas such as where the thumb rests on the grip.
More details
This is a particularly interesting method of filling gaps. The correct procedure is to apply first the provided spray to the surface, let it dry and then apply the glue. If you apply the glue first and then then use the spray, the resulting reaction can cause the glue to turn white. For example, it is often used in bowmaking to fill in worn areas such as where the thumb rests on the grip.
Dangerous substance
This product is classified as a "dangerous substance" under Regulation (EC) No 1272/2008. Before proceeding to purchase, please carefully review the product data sheet on the Site, which indicates the hazard classes or categories, and consult the Safety Data Sheet.
Shipping and returns
Standard shipping in Italy: €9.90 incl. VAT.
For international shipments, the website calculates the rate at checkout.
For packages over 30 kg, contact us for a quote.
Returns: you have 10 days from receipt to exercise your right of withdrawal. Upon delivery, always check the packaging integrity and, if damaged, write "accepted with reservation" on the courier's delivery note.
Complete your purchase
Selected total
Description / Spray activator for cyanolitic glues
Hazards identification
Classification of the substance or mixture
Regulation (EC) No. 1272/2008
Hazard categories:
Hazard Statements:
Label elements
Regulation (EC) No. 1272/2008
Hazard components for labelling
Signal word: Danger
Pictograms:
Hazard statements
Precautionary statements
Other hazards
In case of insufficient ventilation and/or through use, explosive/highly flammable mixtures may develop.
DISCLAIMER
By purchasing, the customer declares to have read and understood all the information on this page and that:
Classification of the substance or mixture
Regulation (EC) No. 1272/2008
Hazard categories:
- Aerosol: Aerosol 1
- Skin corrosion/irritation: Skin Irrit. 2
- Specific target organ toxicity - single exposure: STOT SE 3
- Aspiration hazard: Asp. Tox. 1
- Hazardous to the aquatic environment: Aquatic Chronic 2
Hazard Statements:
- Extremely flammable aerosol.
- Pressurised container: May burst if heated.
- Causes skin irritation.
- May cause drowsiness or dizziness.
- May be fatal if swallowed and enters airways.
- Toxic to aquatic life with long lasting effects.
Label elements
Regulation (EC) No. 1272/2008
Hazard components for labelling
- Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane cyclohexane
Signal word: Danger
Pictograms:
 |
 |
 |
Hazard statements
- H222 Extremely flammable aerosol.
- H229 Pressurised container: May burst if heated.
- H315 Causes skin irritation.
- H336 May cause drowsiness or dizziness.
- H411 Toxic to aquatic life with long lasting effects.
Precautionary statements
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 Do not spray on an open flame or other ignition source.
- P251 Do not pierce or burn, even after use.
- P302+P350 IF ON SKIN: Gently wash with plenty of soap and water.
- P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50° C / 122° F.
Other hazards
In case of insufficient ventilation and/or through use, explosive/highly flammable mixtures may develop.
DISCLAIMER
By purchasing, the customer declares to have read and understood all the information on this page and that:
- ensures one's technical knowledge relating to the handling of chemical substances;
- complies with the regulatory requirements of the current law on the storage, handling, disposal and use of chemical products;
- has read and understood the safety data sheet, the safety advice and the precautions for use;
- adopts the necessary measures to protect human health, safety and the environment by acting in accordance with the EU Council Directive Regulation (CLP) ((EC) No. 1272/2008);
- with the purchase the buyer exempts Cremona Tools SAS from responsibility for any adverse, collateral, direct or indirect event, for willful misconduct or gross negligence, or for any problem due to the use of the substance(s) purchased by him.