OldWood Doratura Minerale 15ml
Sku:
506108
In stock
€26.80
Request a quote
We will reply within 24 hours
Product:
Doratura Minerale is a ground that adds mineral compounds to the wood that enhance the instrument’s base golden hues and an oleo-resinous base that makes it easier to apply smoothly and evenly. On the one hand, when a mineral stratum is introduced, the wood’s pores are saturated, which contributes to improving the wood's features and protection. The dye provided by these components introduces new nuances of color and increases the luminosity of the final finish. The distribution of the particle size of these minerals creates different refractive indexes levels between the layers and substrate (the wood itself), favouring the desired dichromatic effect. On the other hand, the transparent vehicle used fixes these loads evenly and favors the correct leveling of the application.
More details
Attachments
Shipping and returns
Standard shipping in Italy: €9.90 incl. VAT.
For international shipments, the website calculates the rate at checkout.
For packages over 30 kg, contact us for a quote.
Returns: you have 10 days from receipt to exercise your right of withdrawal. Upon delivery, always check the packaging integrity and, if damaged, write "accepted with reservation" on the courier's delivery note.
Description / OldWood Doratura Minerale 15ml
Application Guidelines
These are short, general indications. For more detailed instructions, please download the Technical Data Sheet available for this product.
Security
Use vinyl or nitrile gloves, as they will significantly ease the application of the ground and prevent the absorption of its components through the skin. The use of panoramic goggles against splashes and projections is also recommended. Under Regulation No. 1272/2008 (CLP), the product is not classified as hazardous. The product is non-flammable under regular conditions. It is not classified as hazardous to the environment. Keep it away from drain surfaces and groundwater.
Storage
Keep the container tightly closed in a cool place and avoid direct light exposure. Also, avoid heat sources, radiation, static electricity, and contact with food. Under these conditions, the product remains stable for more than two years
These are short, general indications. For more detailed instructions, please download the Technical Data Sheet available for this product.
- For the first coat, stir the product thoroughly with a small stick until it is completely homogenised. Add a few drops of Special Oil and continue stirring until the mixture is homogeneous, to facilitate the application. Do not exceed the ratio of Oil to Mineral Ground = 1/4.
- Apply small portions of the mixture to the instrument’s surface using your finger or a brush. Spread it in circular motions, applying light pressure and ensuring no excess remains. Allow the product to dry through sunlight or UV light. Although the drying time depends on factors such as light amount and intensity or humidity, maintain a minimum of 8 hours of UV light exposure.
- Once the first coat is dry, apply a second coat and proceed as in the first step. Excellent results are achieved by using two very thin and even coats. When the ground is thoroughly dry, in some cases, lightly rub the surface with a linen or cotton cloth dampened with de-aromatised petroleum essence (wear gloves) to remove any mineral particles that may have surfaced. Allow to dry.
Security
Use vinyl or nitrile gloves, as they will significantly ease the application of the ground and prevent the absorption of its components through the skin. The use of panoramic goggles against splashes and projections is also recommended. Under Regulation No. 1272/2008 (CLP), the product is not classified as hazardous. The product is non-flammable under regular conditions. It is not classified as hazardous to the environment. Keep it away from drain surfaces and groundwater.
Storage
Keep the container tightly closed in a cool place and avoid direct light exposure. Also, avoid heat sources, radiation, static electricity, and contact with food. Under these conditions, the product remains stable for more than two years